Products > COMMERCIAL > Access Products > Floor Access Doors > Aluminum Construction > New! Flood tight Floor Access Door
   

Type FT-30 flood tight floor access doors are constructed for use in applications where there is concern of water or other liquids entering the access opening. Type FT-30 doors are rated to withstand a 30-foot (9.14m) head of water from the topside without leakage and up to a 5-foot (1.52m) head of water from the underside (when specified) and will resist low-pressure gases and odors. Doors are reinforced for AASHTO H-20 wheel loading and feature aluminum construction, type 316 stainless steel hardware, and engineered lift assistance for easy one-hand operation. (Patent Pending)

 

Floor Access Door Models

Type FT-30

 

Standard Features and Benefits                    

  • Floodtight against a 30 foot (9.14m) head of water from the topside and a 5-foot (1.52m) head of water from the underside without leakage
  • Standard Type 316 Stainless Steel Hardware
  • Engineered with lift assistance for smooth, easy one-hand door operation, regardless of size
  • Automatic hold-open device locks the cover in the open position to ensure safe egress
  • Constructed with corrosion resistant materials to provide many years of trouble free, dependable service
  • Heavy-duty construction and positive latching mechanism help to prevent unauthorized access
  • Exclusive 25-year warranty
  • Available in a number of standard and special sizes to satisfy any requirement

 
Guide Specifications

  • Material: 1/4" (6mm) aluminum cover and extruded aluminum frame
  • Cover: Diamond-pattern tread plate reinforced for H-20 wheel loading. Designed for installation in off street locations where the door is not subjected to high density, fast moving traffic. Structural calculations available upon requested. Optional Thermion Safetrax non-skid cover finish available.
  • Frame: Extruded aluminum with bend down anchor tabs around the perimeter. Extrusion is designed with a water retention lip to keep standing water from falling into the opening.
  • Gasket: EPDM gasket adhesive bonded around the entire perimeter of the cover.
  • Hinges: Aluminum hinges welded to the cover and frame with 1/4" (6 mm) type 316 stainless steel hinge pins.
  • Locking mechanism: Each door will be equipped with a minimum of 2 lever type lock assemblies to compress the gasket to provide a flood tight seal. Each lock is engaged by turning a hex head bolt from the topside of the door.
  • Lift Assistance: Type 316 stainless steel gas spring operator(s) with built-in hold open device.
  • Finish: Mill Finish aluminum with a bituminous coating applied to the exterior of the frame
  • Hardware: Type 316 stainless steel throughout.

 

 

 

CA Prop 65 Notice

WARNING : The State of California has deemed that this product can cause cancer, birth defects or other harmful effects. For more information, please visit For more information, Please visit: www.p65warnings.ca.gov/

Find by State and Rep



CAD Details

 

Literature


Specifications


Submittal Drawings


Back to TOP