Type L Roof Hatch Models
Type L-20, L-40, L-50, L-20HZ, L-50HZ, L-90
Standard Features and Benefits
-
Miami-Dade County and Florida Building Commission approval for use in high velocity hurricane zones with large and small missile impact.*
-
Engineered with compression spring operators to provide smooth, easy, one-hand operation, regardless of size
-
Automatic hold-open arm locks the cover in the open position to ensure safe egress
-
Overlapping cover design, full welded corners on cover and curb, EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency
-
Constructed with corrosion resistant materials to provide many years of trouble free, dependable service
-
Heavy gauge construction and positive latching mechanism maintain building security
-
Curb features the Bil-Clip® flashing system, an innovative method to quickly and easily secure single-ply roofing material to BILCO roof products
-
Available in many sizes and curb configurations to satisfy any requirement or installation
*Specify model L-20HZ or L-50HZ
Guide Specifications
-
Material (select one):
-
Steel: Cover and frame are 14 gauge (2 mm) galvannealed steel.
-
Aluminum: Cover and frame are 11 gauge (2.3 mm) aluminum.
-
Stainless Steel: Cover and frame are 14 gauge (2 mm) type 304 stainless steel
-
Cover: Brakeformed, hollow-metal design with 1" (25 mm) concealed fiberglass insulation, 3" (76 mm) beaded, overlapping flange, fully welded at corners, and internally reinforced for 40 psf (195 kg/m2) live load.
-
Curb: 12" (305 mm) in height with integral capflashing, 1" (25 mm) fiberboard insulation, fully welded at corners, and 3-1/2" (89 mm) mounting flange with 7/16" holes (11 mm) provided for securing frame to the roof deck.
-
Gasket: Extruded EPDM rubber gasket permanently adhered to cover.
-
Hinges: Heavy-duty pintle hinges with 3/8" (9 mm) Type 316 stainless steel hinge pins.
-
Latch: Enclosed two-point slam latch with interior and exterior turn handles and padlock hasps.
-
Lift Assistance: Compression spring operators enclosed in telescopic tubes. Automatic hold-open arm with grip handle release.
-
Finish:
-
Steel: Alkyd base red oxide primer.
-
Aluminum: Mill Finish.
-
Stainless Steel: Type 304 stainless steel with mill finish and electrochemical passivation of welds.
-
Hardware:
-
Steel: All hardware is zinc plated/chromate sealed.
-
Aluminum: Type 316 Stainless steel hinges. All other hardware is zinc plated/chromate sealed.
-
Stainless Steel: Type 316 stainless steel.
U.S. Patents 5,960,596 6,347,818
